manualshive.com logo in svg

Hitachi Deskstar 7K400, Specifications

The Hitachi Deskstar 7K400 is a high-performance hard drive designed for exceptional reliability and superior storage capacity. With its vast 400 GB storage, this product offers optimal performance for various applications. To learn more about its detailed specifications, feel free to download the user manual for free from our website, ensuring easy access to valuable information.

Share
Download
background image

Deskstar 7K400 Hard Disk Drive Specification

208 

12.46.1.2  S.M.A.R.T. Read Attribute Thresholds (subcommand D1h)

This subcommand returns the Attribute Thresholds of the device to the host. Upon receipt of the SMART Read 
Attribute Thresholds subcommand from the host, the device reads the Attribute Thresholds from the Attribute 
Threshold sectors and then transfers the 512 bytes of Attribute Thresholds information to the host.

12.46.1.3  S.M.A.R.T. Enable/Disable Attribute Autosave (subcommand D2h)

This subcommand enables and disables the Attribute Autosave feature of the device. The S.M.A.R.T. Enable/Dis-
able Attribute Autosave subcommand allows the device to automatically save its updated Attribute Values to the 
Attribute Data Sector periodically or causes the Autosave feature to be disabled. The state of the Attribute 
Autosave feature—either enabled or disabled—will be preserved by the device across the power cycle.

A value of 00h written by the host into the Sector Count Register of the device before issuing the S.M.A.R.T. 
Enable/Disable Attribute Autosave subcommand will cause this feature to be disabled. Disabling this feature does 
not preclude the device from saving Attribute Values to the Attribute Data sectors during another normal operation 
such as a power-up or a power-down.

A value of F1h written by the host into the device's Sector Count Register before issuing the S.M.A.R.T. Enable/
Disable Attribute Autosave subcommand will cause this feature to be enabled. Any other nonzero value written by 
the host into this register before issuing the S.M.A.R.T. Enable/Disable Attribute Autosave subcommand will not 
change the current Autosave status. However the device will respond with the error code specified in Table 166:  
“S.M.A.R.T. Error Codes” on page 220.

The S.M.A.R.T. Disable Operations subcommand disables the Autosave feature along with the S.M.A.R.T. opera-
tions of the device.  

Upon the receipt of the subcommand from the host, the device asserts BSY, enables or disables the Autosave fea-
ture, clears BSY, and asserts INTRQ.

12.46.1.4  S.M.A.R.T. Save Attribute Values (subcommand D3h)

This subcommand causes the device to immediately save any updated Attribute Values to the device's Attribute 
Data sector regardless of the state of the Attribute Autosave feature. Upon receipt of the S.M.A.R.T. Save Attribute 
Values subcommand from the host, the device asserts BSY, writes any updated Attribute Values to the Attribute 
Data sector, clears BSY, and asserts INTRQ.

12.46.1.5  S.M.A.R.T. Execute Off-line Immediate (subcommand D4h)

This subcommand causes the device to immediately initiate the set of activities that collect Attribute data in an off-
line mode (off-line routine) or execute a self-test routine in either captive or off-line mode. The Sector Number reg-
ister shall be set to specify the operation to be executed.

Sector 

Number

Operation to be executed

0

Execute S.M.A.R.T. off-line data collection routine immediately

1

Execute S.M.A.R.T. Short self-test routine immediately in off-line mode

2

Execute S.M.A.R.T. Extended self-test routine immediately in off-line mode

4

Execute SMART Extended self-test routine immediately in off-line mode

127

Abort off-line mode self-test routine

129

Execute S.M.A.R.T. Short self-test routine immediately in captive mode

130

Execute S.M.A.R.T. Extended self-test routine immediately in captive mode

132

Execute SMART Selective self-test routine immediately in captive mode

Summary of Contents for Deskstar 7K400
















































































































































































































































































Reviews:

No comments

Related manuals for Deskstar 7K400

Quest Leisure Products C0106 Instructions Manual preview
C0106
Brand: Quest Leisure Products Pages: 22
IBM System Storage TS2900 Manual preview
System Storage TS2900
Brand: IBM Pages: 130
U-Line S-5188 Quick Start Manual preview
S-5188
Brand: U-Line Pages: 3
Qualstar RLS-4470 Technical & Service Manual preview
RLS-4470
Brand: Qualstar Pages: 205
YearGoo 2.5” Solid State Drive Manual preview
2.5” Solid State Drive
Brand: YearGoo Pages: 6
Kanguru Q2S-3H-15T User Manual preview
Q2S-3H-15T
Brand: Kanguru Pages: 12
Hama Rotate FlashPen Operating Instruction preview
Rotate FlashPen
Brand: Hama Pages: 4
Keter MANOR Assembly Instructions Manual preview
MANOR
Brand: Keter Pages: 28
Lifetime 1034594 Assembly Instructions Manual preview
1034594
Brand: Lifetime Pages: 20
Plasmon MOD 910 User Manual preview
MOD 910
Brand: Plasmon Pages: 33
8BitMods MemCard PRO User Manual preview
MemCard PRO
Brand: 8BitMods Pages: 15
Yamaha MBS-10 User Manual preview
MBS-10
Brand: Yamaha Pages: 15
Yamaha CDR400tx User Manual preview
CDR400tx
Brand: Yamaha Pages: 23
Yamaha CDR400t User Manual preview
CDR400t
Brand: Yamaha Pages: 22
Yamaha CDR400c Series User Manual preview
CDR400c Series
Brand: Yamaha Pages: 23
Western Digital WDE1MS1200 Specifications preview
WDE1MS1200
Brand: Western Digital Pages: 2
Western Digital WDBAAP0000NBK - TV Live Media Player Product Specifications preview
WDBAAP0000NBK - TV Live Media Player
Brand: Western Digital Pages: 2
Western Digital VelociRaptor WD5000HHTZ Specifications preview
VelociRaptor WD5000HHTZ
Brand: Western Digital Pages: 2

Brands by name

Popular brands

Load more brands