14
OPERATION PROCEDURE
7.5.
CHANGING DISPLAY MODE PROCEDURE
RUN/STOP
UNIT SELECTION
TEMP.
RESET
CHECK
MODE CHANGE
TIMER
DISP.MODE
A/C／H.STRG
OPTION
GROUP
ABNML
MULTI
HEAT
SET TEMP.
COOL
UNIT No.
℃
6
5
1
4
3
2
8
7
NO FUNC.
EMG.STOP
INDVDL
TIMER
CHECK
OUTLET
INLET
A/C
H.STRG
MPa
TEMP. PR.
H.RCV.
DEMAND
LOCAL
Select the unit by pressing “UNIT SELECTION” switch.
(Refer to item 1 of page. 11.)
NOTE:
This procedure is not performed during the multiple-unit
control.
1
4
3
2
SET TEMP.
COOL
UNIT No.
℃
INDVDL
A/C
Press “DISP. MODE” switch.
Indication of setting temperature is automatically
changed as follows.
The display is changed according to the following order;
Inlet Water
→
Light Off
→
Outlet Temperature
→
Light Off
℃
1
4
3
2
COOL
UNIT No.
INDVDL
INLET
A/C
TEMP.
NOTE:
In case of the multiple-unit control is selected and “UNIT SELECTION” switch is pressed, “NO
FUNC.” is indicated. Unit No. is always indicated “AA” when all the units are operated
simultaneously, in normal mode.
2
1
The above figure shows the case
of selecting unit No.4.
The above figure shows the case
of indicating inlet temperature.
