--- 23 ---
9-3. Tightening Torques
Slotted Hd. Screw (Seal Lock) M4 x 10 [24]
•••••••••••••••••••••••
1.8 0.4 N
•
m (18 4 kgf
•
cm)
Tapping Screws (W/Flange) D4 [47] [56]
•••••••••••••••••••••••••••
2.0 0.5 N
•
m (20 5 kgf
•
cm)
Nylock Bolt (W/Flange) M4 [60]
••••••••••••••••••••••••••••••••••••••••••
3.6 0.7 N
•
m (37 7 kgf
•
cm)
Special Bolt M4 [14]
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
4.4 0.5 N
•
m (45 5 kgf
•
cm)
Machine Screws (W/Washers) M5 x 60 (Black) [45]
••••••••••••
2.5 0.5 N
•
m (25 5 kgf
•
cm)
Hex. Hd. Tapping Screw D5 x 60 [37]
•••••••••••••••••••••••••••••••••
3.4 0.7 N
•
m (35 7 kgf
•
cm)
Hex. Socket Hd. Bolt (W/Flange) M5 x 12 [22]
•••••••••••••••••••••
5.9 1.5 N
•
m (60 15 kgf
•
cm)
Nylock Bolt (W/Flange) M6 x 35 [20]
••••••••••••••••••••••••••••••••••••••••
11.8 2.0 N
•
m (120 20 kgf
•
cm)
9-4. Wiring Diagram
Carefully ensure that wiring is accomplished as illustrated below. As incorrect wiring will result in lack of rotation,
reverse rotation or other malfunctions, close attention is absolutely necessary. (Figs. 19, 20, 21 and 22)
O-ring [9]
Spherical portion of the Recipro Plate [27]
Polished portion of Plunger (B) [4]
Inner circumference of Metal (B) [10]
9-2. Lubrication
Nippeco SEP-3A
Slanted portion of Lever (A) [16]
Inner circumference of the Swing Roller [11]
Teeth of Gear (B) [31]
Pinion of the Armature [35]
Apply 45 g of Nippeco SEP-3A to the Swing Roller [11],
Plunger (B) [4] and Gear (B) [31] in Gear Cover (B) [5].
Fig. 19
Switch body
Noise suppressor
Noise suppressor earth wire
Dial resistor
Triac ass'y
Summary of Contents for CR 13VC
Page 34: ......