14
Please check and clean the air
lter periodically. When the indicators or a message
prompts you to clean the air
lter, comply with it as soon as possible. The air
lter has two
kinds of
lters inside. Replace the
lters when they are damaged or too soiled. To prepare
the new
lters, make contact with your dealer and tell the following type number.
Type number :
UX36761
(Filter set)
When you replace the lamp, please replace the air
lter. An air
lter of speci
ed type will come together with a replacement
lamp for this projector.
1.
Turn the projector off, and unplug the power cord. Allow the
projector to suf
ciently cool down.
2.
Use a vacuum cleaner on and around the
lter cover.
3.
Pick and pull up the
lter cover knobs to take it off.
4.
Use a vacuum cleaner for the
lter vent of the projector.
5.
Take the
ne meshed
lter out while holding the
ltercover.
It is recommended to leave the coarse meshed
lter in the
lter cover as it is.
6.
Use a vacuum cleaner on both sides of the
ne meshed
lter while holding it so it will not be sucked in. Use a
vacuum cleaner for the inside of the
lter cover to clean
up the coarse meshed
lter. If the
lters are damaged or
heavily soiled, replace them with new ones.
7.
Put the
ne meshed
lter on the coarse meshed one,
turning its stitched side up.
8.
Put the
lter unit back into the projector.
9.
Turn the projector on and reset the
lter time using the
FILTER TIME item in the EASY MENU
.
(1) Press the
MENU
button to display a menu.
(2) Point at the FILTER TIME using the
▼
/
▲
button, then
press the
►
button. A dialog will appear.
(3) Press the
►
button to select
“
OK
” on the dialog. It
performs resetting the
lter time.
Cleaning and replacing the air
fi
lter
WARNING
►
Before taking care of the air
lter, make sure the power cable
is not plugged in, then allow the projector to cool suf
ciently.
►
Use only the air
lter of the speci
ed type. Do not use the projector without the
air
lter or the
lter cover. It could result in a
re or malfunction to the projector
.
►
Clean the air
lter periodically. If the air
lter becomes clogged by dust or the like,
internal temperatures rise and could cause a
re, a burn or malfunction to the projector.
NOTE
• Please reset the
lter time only when you have cleaned or replaced
the air
lter, for a suitable indication about the air
lter.
• The projector may display the message such as “CHECK THE AIR FLOW” or
turn off the projector, to prevent the internal heat level rising.
2
Filter (
ne meshed)
Filter (coarse meshed)
7
Stitched
side
4
Intake vent
Filter cover
Filter cover knobs
3