11
ENGLISH
Turning off the power
1.
Press the
STANDBY/ON
button on the
projector or the remote control.
The message “Power off?” will appear on
the screen for about 5 seconds.
2.
Press the
STANDBY/ON
button again
while the message appears.
The projector lamp will go off, and the
POWER
indicator will begin blinking in
orange. Then the
POWER
indicator will
stop blinking and light in steady orange
when the lamp cooling is complete.
3.
Attach the lens cover, after the
POWER
indicator turns in steady orange.
Do not turn the projector on for about 10 minutes or more after turning it off. Also,
do not turn the projector off shortly after turning it on. Such operations might cause
the lamp to malfunction or shorten the lifetime of some parts including the lamp.
WARNING
►
Do not touch around the lamp cover and the exhaust vents
during use or just after use, since it is too hot.
►
Remove the power cord for complete separation. The power outlet should be
close to the projector and easily accessible.
NOTE
•
Please power off the projector after any connected devices are
powered off.
• This projector has the AUTO POWER OFF function that can make the
projector turn off automatically. For more information, please see the “Operating
Guide” in the CD.
• When you attach or remove the lens cover, move it vertically up and down
while keeping the knob to the right as illustrated in the
gure.
STANDBY/ON
button
POWER
indicator
VIDEO
DOC.CAMERA
KEYSTONE
ASPECT
SEARCH
BLANK
MUTE
MY BUTTON
POSITION
1
2
ESC
ENTER
MENU
RESET
COMPUTER
MY SOURCE/
AUTO
MAGNIFY
PAGE
UP
VOLUME
DOWN
ON
OFF
㧗
FREEZE
