background image

ENGLISH   

- 28 -

352*5$00(

%$1'

67$1'$5'

6($5&+

),1(781,1*

6725(

9+)

%*

Selecting Band

BAND, can be chosen either,
• VHF1, VHF3 or UHF by “ ” or “ ” button.

Standard

The "

STANDARD

" setting is fixed to "

B/G

". You cannot change

this item's setting.

Selecting Search

To start the search process, press “ ” button for forward
search or “ ” button for backward search. 

SEARCH

 item

blinks during search process, since the process is stopped

or signal is found. During search process the semi-transpar-

ent menu background becomes "

BLUE

". To stop the search

process “ ” or “ ” button must be pressed again.

Selecting Fine Tuning

You can use the Fine Tuning process for fine adjustment (af-

ter coarse adjustment), if you are not happy about the image

on the screen.
Use “ ” or “ ” button on 

FINE TUNING

 item, until getting the

best image on the screen.

To Store Settings

Press “ ” or “ ” button on 

STORE

 option to store Install menu

settings.

Programme Menu

• To enter Programme menu directly, press the "

" button,

or

• Press "

" button, now you are in Main menu. In the Main

menu, select “

PROGRAM.

” using “ “ or “ ” button. Then

enter the Programme menu pressing “ ” or “ ” button.

By moving the cursor in four directions you can reach 30 pro-

grammes in the same page. By scrolling the pages up or

down by pressing the navigation buttons you can select all the

programmes in TV mode (except the AV mode).
In menus, “ “ and “ ” buttons are working like "Direction Up"
and "Direction Down".
By cursor action, programme selection is done automatically.

Selected programme is displayed with 

“CYAN”

 characters. In

order to select programme is also possible by using digit or

double-digit button. In this way programme selection is auto-

matic and after selection the selected programme is displayed

with cyan characters. The TV Status is changed by the pro-

gramme selection too. When using double-digit button in or-

der to select a programme, the Programme Number in TV

Status OSD is displayed in "

P --

" form, and by pressing digit

buttons they are displayed in it.
Programme Number is between 00 and 99. Programme

Name has a name string with 5 characters. After autostore

process the Programme Names are set to "

PR01

" (pro-

gramme number),
At the bottom of the menu there is a programme sort functions

section. Each function is activated by color button (seen below).

NAME

 allows changing the programme name. By 

DELETE

 you

can delete programmes that you decided. 

INSERT

 section is

for inserting programmes into another programme spaces. By

selecting 

AUTOSTORE

 section, Autostore menu will be avail-

able.
To change the name of a decided programme, Select the pro-

gramme and push the 

RED (NAME) 

button. The first letter be-

gins to blank on the selected name. To change that letter “ “
or “ ” button can be used, and to select the other letters, “ ”
or “ ” button can be used. If the cursor is at the last letter of the
Programme Name, pressing “ ” button moves the cursor at

the beginning. On the contrary, if the cursor is at the beginning
of the Programme Name, pressing “ ” button moves the

cursor at the end.

35

35

35

35

35

35

$8726725(

,16(57

'(/(7(

1$0(

After changing the name by pressing the 

RED

 button (

STORE

)

it is stored. After activating the name process the “

INSERT

”,

“

DELETE

” and “

AUTOSTORE

” processes will be inactive and

"

CANCEL

" option will be valid. This option cancels the name

process, if the new name do not want to be stored.

When the 

GREEN

 button is pressed, "

NAME

", "

AUTOSTORE

"

and "

DELETE

" functions are erased, the selected programme

(A) is displayed with green characters. From now on, the au-

tomatic selection is canceled. Cursors moves are indicated

with “

CYAN

” characters. With navigation buttons, the decided

program space (B) can be selected and by pressing the green

button again the programme will be inserted into that space.
All programmes below the inserted  programme will move

down by one number.
"

CANCEL

" function cancels the activated "

INSERT

" process.

For "

DELETE

" process press the yellow button, (“

NAME

”, “

IN-

SERT

” and “

AUTOSTORE

” functions are inactive). Pressing

yellow button again erases the selected programme from the

programme list, and the programmes below shift one up.

Pressing blue button cancels the activated “

DELETE

” process.

To enter Autostore menu, press to the blue button. To learn the

features of this function see "

AUTOSTORE

" below.

02-ENG-(CP2843S)-2872H-AV-3040-AK37-ST1P-VST.p65

26.06.2003, 10:29

28

Summary of Contents for CP2843S



















Reviews: