Hitachi CP-X8150 User Manual Download

Page: 109 / 115

109

• The

FILTER

indicator might light up in orange or red when something

blocks the intake vents even though the air filter is clean.

• The

FILTER

indicator might light up differently from other indicators or display

messages related to cleaning the air filter. Follow the prompt that is displayed

earlier.

NOTE

For the

SECURITY

indicator, see SECURITY INDICATOR in the SECURITY

(



)

For the

SHADE

indicator, see the section

"Temporarily shading the screen"

(



The

FILTER

indicator shows the condition of the air filter. Utilize this feature to

keep the interior of the projector in good condition.

FILTER indicator

Description

Turned

off

The air filter is clean.

No need to clean up.

Lighting In

Orange

The air filter is going to be choked.

It is recommended to clean it.

Lighting In

Red

The air filter is choked.

It is required to turn the power off and clean the air filter

immediately.

Troubleshooting

Regarding the indicator lamps (continued)

Resetting all settings

When it is hard to correct some wrong settings, the FACTORY RESET function

of SERVICE item in OPTION menu (



) can reset all settings (except settings

such as LANGUAGE, LAMP TIME, FILTER TIME, FILTER MESSAGE, STANDBY

MODE, COMMUNICATION, SECURITY and NETWORK) to the factory default.

Summary of Contents for CP-X8150




















































































































Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands

Hitachi CP-X8150, User Manual

Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands