Hitachi CP-X8150 User Manual Download

Page: 108 / 115

108

Troubleshooting

Regarding the indicator lamps (continued)

• When the interior portion has become overheated, for safety purposes,

the projector is automatically shut down, and the indicator lamps may also be

turned off. In such a case, disconnect the power cord, and wait at least 45 minutes.

After the projector has sufficiently cooled down, please make confirmation of the

attachment state of the lamp and lamp cover, and then turn the power on again.

NOTE

POWER

indicator

LAMP

indicator

TEMP

indicator

Description

Blinking

Red

Lighting

Red

Turned

off

Blinking

Red

The cooling fan is not operating.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufficiently cooled down, please make confirmation

that no foreign matter has become caught in the fan,

etc., and then turn the power on again.

If the same indication is displayed after the remedy,

please contact your dealer or service company.

Blinking

Red

Lighting

Red

Turned

off

Lighting

Red

There is a possibility that the interior portion
has become heated.

Please turn the power off, and allow the projector to

cool down at least 20 minutes. After the projector has

sufficiently cooled down, please make confirmation of

the following items, and then turn the power on again.

• Is there blockage of the air passage aperture?

• Is the air filter dirty?

• Does the peripheral temperature exceed 40°C?

• Is the setting for ALTITUDE appropriate?

For details on ALTITUDE, refer to ALTITUDE

of SERVICE in the OPTION menu (



). If the

projector is used with a wrong setting, it may cause

damage to the projector itself or the parts inside.

Lighting

Green

Simultaneous

blinking in

Red

It is time to clean the air filter.

Please immediately turn the power off, and clean or

change the air filter referring to the section

Cleaning

and replacing the air filter

. After cleaning or

changing the air filter, please be sure to reset the

filter timer. After the remedy, reset the power to ON.

Lighting

Green

Alternative

blinking in

Red

There is a possibility that the interior portion
has become overcooled.

Please use the unit within the usage temperature

parameters (5°C to 40°C). After the treatment, reset

the power to ON.

Blinking In

Green

for

approx. 3

seconds.

Turned

off

Turned

off

At least 1 Power ON schedule is saved to the
projector.

Please refer to

3.1.7 Schedule Settings

in the

Network Guide

Summary of Contents for CP-X8150




















































































































Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands

Hitachi CP-X8150, User Manual

Search results

Summary of Contents for CP-X8150

Reviews:

Related manuals for CP-X8150

Brands by name

Popular brands