Hitachi CP-X615 series User Manual Download

Page: 53 / 73

Item

Description

SECURITY

(continued)

5.2 Displaying the MY TEXT

(1) Use the ▲/▼ buttons on the SECURITY menu

to select the MY TEXT DISPLAY menu and

press the ► button to display the MY TEXT

DISPLAY on/off menu.

(2) Use the ▲/▼ buttons on the MY TEXT DISPLAY

on/off menu to select on or off.

TURN ON

TURN OFF

When it is set TURN ON, the MY TEXT will be

displayed on the START UP screen. Whichever

is selected, the MY TEXT will be displayed on the

INPUT-INFORMATION when the INFORMATION

on the SERVICE menu is chosen.

• This function is available only when the MY TEXT

PASSWORD function is set to the TURN OFF.

5.3 Turning on the MY TEXT PASSWORD

The MY TEXT PASSWORD function can prevent the MY TEXT from being overwritten.
5.3-1 Turning on the MY TEXT PASSWORD function
(1) Use the ▲/▼ buttons on the SECURITY menu

to select the MY TEXT PASSWORD menu and

press the ► button to display the MY TEXT

PASSWORD on/off menu.

5.3-2 Setting the MY TEXT PASSWORD
(1) Display the MY TEXT PASSWORD on/off menu

using the procedure in 5.3-1

(2) Use the ▲/▼ buttons on the MY TEXT

PASSWORD menu to select TURN ON. The

ENTER PASSWORD BOX (small) will be

displayed.

(3) Use the ▲/▼/◄/► buttons to enter the

PASSWORD. Move the cursor to the right side of

the ENTER PASSWORD BOX (small) and press

the ► button to display the PASSWORD AGAIN

BOX, and then enter the same PASSWORD

again.

(4) Move the cursor to the right side of the

PASSWORD AGAIN BOX and press ► button to

display the PASSWORD for about 20 seconds,

then please make note of the PASSWORD

during this time.

Pressing the ENTER button on the remote control

or INPUT button on the projector will return to the

MY TEXT PASSWORD on/off menu. When the

PASSWORD is set for the MY TEXT;
• The MY TEXT DISPLAY menu will be unavailable, which can prohibit

changing the DISPLAY setting.

• The MY TEXT WRITING menu will be unavailable, which can prevent the

MY TEXT from being overwritten.

OPTION Menu

MY TEXT DISPLAY on/off

ENTER PASSWORD BOX

(small)

PASSWORD AGAIN BOX

NOTE PASSWORD BOX

OPTION Menu (continued)

(continued on next page)

MY TEXT PASSWORD

Summary of Contents for CP-X615 series










































































Search results

Summary of Contents for CP-X615 series

Reviews:

Related manuals for CP-X615 series

Brands by name

Popular brands

Hitachi CP-X615 series, User Manual

Search results

Summary of Contents for CP-X615 series

Reviews:

Related manuals for CP-X615 series

Brands by name

Popular brands