Hitachi CP-X615 series User Manual Download Page 23

Page: 23 / 73

Operating

Press the MENU button on the remote control or one of the cursor

buttons on the projector.

The Advanced MENU, or EASY MENU that has priority just after

powered on, will appear.

If you want to move the menu position, use the cursor buttons after

pressing the POSITION button. While the projector is displaying any

menu, the MENU button on the projector works as the cursor buttons.

Using the menu function

If you want to change it to the Advanced MENU, select the

"Go to Advanced Menu..."

● Some functions cannot be performed when a certain input port is selected, or

when a certain input signal is displayed.

● When you want to reset the operation, press the RESET button on the remote control

during the operation. Note that items whose functions are performed simultaneously

with operation (ex. LANGUAGE, H PHASE, VOLUME etc.) cannot be reset.

● In the Advanced MENU, when you want to return to the previous display, press the ◄

cursor button on the projector or remote control, or the ESC button on the remote control.

This projector has the following menus: PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION,

NETWORK, and EASY MENU. The EASY MENU consists of functions often used, and the other menus

are classified into each purpose and brought together as the Advanced Menu. Each of these menus is

operated using the same methods. The basic operations of these menus are as follows.

In the EASY MENU

Use the ▲/▼ cursor buttons to select an item to operate.

Use the ◄/► cursor buttons to operate the item.

Press the MENU button on the remote control again to close the menu and complete this operation.

Even if you do not do anything, the dialog will automatically disappear after about 10 seconds.

Use the ▲/▼ cursor buttons to select a menu.

If you want to change it to the EASY MENU, select the EASY MENU.

Then press the ► cursor button on the projector or remote control, or the ENTER button

on the remote control to select an item. The display of the selected menu will be active.

In the Advanced MENU

Use the ▲/▼ cursor buttons to select an item to operate.

Then press the ► cursor button on the projector or remote control, or the ENTER button

on the remote control to progress. The operation menu of the selected item will appear.

Use the ▲/▼ cursor buttons to operate the item.

RESET button

ENTER button

MENU button

Cursor buttons

BLANK

LASER

ASPECT

ESC

MENU

RESET

POSITION

AUTO

MAGNIFY

MY BUTTON

VOLUME

MUTE

OFF

FREEZE

KEYSTONE

SEARCH

PUSH

ENTER

PAGE UP

PAGE DOWN

STANDBY/ON VIDEO

RGB

LASER

INDICATOR

Summary of Contents for CP-X615 series










































































Search results

Summary of Contents for CP-X615 series

Reviews:

Related manuals for CP-X615 series

Brands by name

Popular brands

Hitachi CP-X615 series, User Manual

Search results

Summary of Contents for CP-X615 series

Reviews:

Related manuals for CP-X615 series

Brands by name

Popular brands