Hitachi CP-X600 series Operating Manual Download

Page: 49 / 64

Item

Description

SECURITY

3.1-3 Input a 4 part PIN Code using the ▲/▼/◄/►

/RGB and INPUT buttons.

A CONFIRMATION BOX will appear. Reenter the

same PIN Code. This will complete the PIN Code

registration.

NOTE: If there is no key input for about 55 seconds

while the PIN BOX or the CONFIRMATION BOX are

displayed the menu will close. If necessary repeat

the process from 3.-.

Afterwards, anytime the projector is restarted after

the power switch is turned off the PIN BOX will be

displayed. Enter the registered PIN Code.

The projector can be used after entering the

registered PIN Code. If an incorrect PIN Code is

input the PIN BOX will be displayed again.

If an incorrect PIN Code is input 3 times the projector will turn off. Afterwards

the projector will turn off every time an incorrect PIN Code is input. The

projector will also turn off if there is no key input for about 5 minutes while

the PIN BOX is displayed.

This function will activate only when the projector is started after the power

switch was turned off.

•

Please do not forget your PIN Code.

3.2 Turning Off the PIN LOCK Function

3.- Follow the procedure in 3.- to display the PIN LOCK on/off menu.

Use the ▲/▼ buttons to select TURN OFF and the PIN BOX will be

displayed.

Enter the registered PIN Code to turn the PIN LOCK function off.

If an incorrect PASSWORD is entered the menu will close.

3.3 If you have forgotten your PIN Code

3.3- While the PIN BOX is displayed, press and

hold the RESET button for three seconds or

press and hold the INPUT and ► buttons for

three seconds. The 0 digit Inquiring Code will

be displayed.

NOTE: If there is no key input for about 5 minutes

while the Inquiring Code is displayed the projector

will turn off.

3.3- Contact your dealer with the 0 digit Inquiring Code. Your PASSWORD

will be sent after your user registration information is confirmed.

OPTION Menu (continued)

OPTION Menu

PIN BOX

2+0$1:

4)$

+PRWV2+0%QFG

CONFIRMATION BOX

(PIN BOX)

2+0$1:

4)$

%QPHKTOCVKQP

2+0$1:

+PSWKTKPI%QFG

Inquiring Code

(PIN Code)

(continued on next page)

Summary of Contents for CP-X600 series

































































Search results

Summary of Contents for CP-X600 series

Reviews:

Related manuals for CP-X600 series

Brands by name

Popular brands

Hitachi CP-X600 series, Operating Manual

Search results

Summary of Contents for CP-X600 series

Reviews:

Related manuals for CP-X600 series

Brands by name

Popular brands