Hitachi CP-X267 Network Manual Download Page 51

Page: 51 / 119

3.6 Confirm the connection to your destination (continued)

The projector you want to send your images

to is in the Slide show mode in the PC-LESS

Presentation.

A Slideshow is currently running on the projector that you are trying to display to.

The projector is not set to the Live Mode.

Are you sure you want to switch to Live Mode?

The projector is not set to the MIU as an

input signal.

Are you sure you want to change the input channel of the Projector to MIU?

3 . Using the Live Mode

• Click

[Yes]

, then the projector is switched

from the Slide show mode to the Live

Mode.

• Click

[No]

, then the projector is remained

in the Slide show mode, and the “Live

Viewer 3” main menu is displayed in

stand-by mode on your PC.

• Click

[Yes]

, then the projector is switched

to the Live Mode.

• Click

[No]

, then the projector is remained

as it is, and the “Live Viewer 3” main

menu is displayed in stand-by mode on

your PC.

• Click

[Yes]

, then the projector is switched

to the MIU.

• Click

[No]

, then the projector is remained

as it is, and the “Live Viewer 3” main

menu is displayed in stand-by mode on

your PC.

Summary of Contents for CP-X267
























































































































Search results

Summary of Contents for CP-X267

Reviews:

Brands by name

Popular brands

Hitachi CP-X267, Network Manual

Search results

Summary of Contents for CP-X267

Reviews:

Brands by name

Popular brands