3
3 . Using the Live Mode
3.3 Quick connection to the network (continued)
3 .3 .3 Connecting to the network
There are some options to connect to the
network.
• Enter PassCode
• Configure Manually
• Select From List
Select From List
Before selecting this item, your PC and the projectors need to be connected to the
same network.
If the connection is already established, select
[Select From List]
.
From the list of the projectors connected to the network, select which projector
you would like to send your images. Proceed to the 3.6
Confirm the connection
to your destination
. (
50
)
Enter PassCode
If you want to use the Passcode for network connection, select
[Enter PassCode]
and click
[NEXT]
.
The Passcode is given by the projector on screen. And you simply input the
Passcode to the “Live Viewer 3” to connect the network.
Proceed to the 3.4
Passcode connection
. (
32
)
Configure Manually
Select
[Configure Manually]
and click
[NEXT]
.
Then, there are 3 options on the manual connection method.
Select one of them to meet your requirement.
•
Profile
Proceed to the 3.5.1
Profile connection
(
41
)
You just select one of the stored profile data to connect the network.
•
History
Proceed to the item 3.5.2
History connection
(
42
)
Once connecting to the network, the “Live Viewer 3” stores the history.
If you need the same connection again, select
[History]
.
Then, all you need to do is to select one of the history data from the list.
•
Configure Network Settings Manually
Proceed to the item 3.5.3
Configuring manually
(
43
)
If you need to make the setting manually, select
[Configure Network
Settings Manually]
.
