4
3 . Using the Live Mode
3 .2 .2 Software Installation Procedure
1) Turn on the PC.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the
PC's CD-ROM drive.
4) After a moment, the Welcome dialog will
appear as shown on the right. Press
[Next]
.
• If the Welcome dialog doesn't appear, proceed as follows:
(1) Click on the [Start] button on the toolbar and select the “Run”.
(2) Enter E:\software\setup.exe and then press
[OK]
.
NOTE
If your CD-ROM drive is not drive E on your PC, you will need to
replace E with the correct drive letter assigned to your CD-ROM
drive.
If the software has been already installed, Uninstallation will be done. Click
[Cancel]
button, then uninstallation will be canceled. If you uninstalled the
software by miss-operation, please re-install the software from first procedure.
5) The License Agreement dialog appears. If you
accept it, press
[Yes]
.
6) The Choose Destination Location dialog
appears. Press
[Next]
.
7) Confirm the program folder name. If “Projector
Tools” is okay, press
[Next]
to continue. If not,
enter the desired folder name and then press
[Next]
.
• The C:\Program Files\Projector Tools\LiveViewer3 folder will be
created and the program will be installed into that folder. If you wish to install to
a different folder, click
[Browse]
and select another folder.
NOTE
3.2 Install “Live Viewer 3” (continued)
