Hitachi CP-X1200W, Service Manual

Page: 35 / 97

33
CP-X1200(P5XLA) / CP-X1250(P5XMLA) / CP-X1200
W
A(P5XMLB)
/ PJ1165(P5XMB)
4. Wiring of the bottom case when the exhaust fan holder is mounted to it.
A84
Right speaker
#3055
Attach the leads to the exhaust fan
as per the assembly diagram.
Pass the exhaust fan leads through
the notch in the duct.
Pass the TSW leads through the
notch in the ballast holder.
Before attaching the exhaust fan duct, send the TSW
leads from the side behind the duct, install the TSW first
then the fan duct. Surplus leads cannot be left inside the
duct, so pass them through the side of the ballast holder.
Verify the type of TSW, and install it so that stamped
designation is visible.
(YS11A120A)
Push the TSW (lamp temperature switch) into its fitting
until a click can be heard.
TSW
Wiring diagram 5 (P5XLA/P5XMLA/P5XMLB)