Hitachi CP-WX11000, Service Manual, Page: 36 / 121

36
CP-WX11000 ( P6WX )
7. Attaching the lens (1)
Follow the procedures in steps 5 and 6
for Attaching the SD-804/LL-805/UL-806
Lens and install the lens in the LCD
projector. Support the lens with the lens
adapter attached and install it in the LCD
projector.
Caution:
ŷ Do not hold the lens by the lens shade
when attaching the lens as this may
lead to injury or malfunction.
ŷ Take care to avoid hitting the surface
of the lens on the LCD projector
when attaching the lens as this may lead to malfunction.
8. Attaching the lens (2)
Support the lens installed in the LCD
projector and move the lock lever on the
projector as far as it will go to the right
(until the lock lever clicks into the locked
position).
Caution:
ŷ
To prevent the lens from falling off,
after attaching the lens, check that
it is securely mounted and that the
lock lever does not move.
9. Attaching the optional parts (1)
(SL-802/SL-803 only)
Have the two blinders supplied with the
lens ready and mount the
¿ rst blinder on
the lens shade.
10. Attaching the optional parts (2)
(SL-802/SL-803 only)
Rotate the attached blinder to the
underside of the lens and mount the
second blinder on the lens shade in the
same way.
Engage the two catches on these
blinders.
11. Assembling the main unit parts (1)
Insert the two catches on the front cover
into the LCD projector body to attach the
front cover.
12. Assembling the main unit parts (2)
Screw on the front ring.
13. Attaching the optional parts (3)
(SL-802/SL-803 only)
Have the two protectors supplied with the
lens ready and insert the
¿
rst protector
between the front ring and the lens.
14. Attaching the optional parts (4)
(SL-802/SL-803 only)
Rotate the attached protector to the
underside of the lens and insert the
second protector in the same way
between the front ring and the lens.
Engage the two catches on the protector.
Lens attachment is completed.
Terminal on projector
Terminal on lens
Lens shade
Groove
Rib
Lock lever
Lock lever
Blinder
Lens shade
Blinder
Catch
Catch
Front cover
Catches
Front ring
Protector
Catch
6. Removing the lens (3)
Unplug the connector on the lens from
the socket of the lens adapter.
Using the hexagon wrench supplied
with the LCD projector, loosen the four
hexagon screws on the lens and remove
the lens adapter.
Have the replacement USL-801/SL-802/
SL-803 lens ready. Follow the procedures
in steps 1 and 2 for Attaching the SD-804/
LL-805/UL-806 Lens and mount the lens
adapter on the replacement lens.
1. Disassembling the main unit parts (1)
Unscrew the front ring.
Caution:
ŷ
Be sure to turn off the LCD projector
before changing the lens.
ŷ Return the lens shift to the center
position. Refer to the user manual
supplied with the LCD projector for
instructions on how to return the
lens shift to the center position.
Changing from an SD-804/LL-805/UL-806 Lens to a USL-801/SL-802/SL-803 Lens
2. Disassembling the main unit parts (2)
Remove the blind sheet.
3. Disassembling the main unit parts (3)
Remove the front cover.
4. Removing the lens (1)
Support the lens and move the lock lever
to the left while pressing the lock lever
release button on the LCD projector.
5. Removing the lens (2)
Support the lens and remove the lens from
the LCD projector. Place the detached
lens on a soft cloth or similar.
Caution:
ŷ Do not hold the lens by the lens shade
when removing the lens as this may
lead to injury or malfunction.
ŷ Take care to avoid hitting the surface
of the lens on the LCD projector
when removing the lens as this may
lead to malfunction.
Front ring
Front cover
Blind sheet
Lock lever
Release button
Blinder
Hexagon wrench
Socket
Connector
Front ring
Lens shade