Hitachi CP-WU5500 User Manual Download Page 88

Page: 88 / 124

OPTION menu

Item

Description

SERVICE

Selecting this item displays the SERVICE

menu.

Select an item using the ▲/▼ buttons,

and press the ► button or the

ENTER

button on the remote control to execute

the item.

ALTITUDE

Using the ▲/▼ buttons switches the rotation speed of the cooling

fans. If the projector is used at an altitude of about 1600 m or higher,

select HIGH. Otherwise, select NORMAL. Note that the projector is

noisier when the HIGH is selected.

HIGH

NORMAL

AUTO ADJUST

Using the ▲/▼ buttons to select one of the mode. When the

DISABLE is selected, the automatic adjustment feature is disabled.

FINE

FAST

DISABLE

FINE: Finer tuning including H.SIZE adjustment.

FAST: Faster tuning, setting H.SIZE to prearranged data for the

input signal.

• Depending on conditions, such as input image, signal cable to

the projector, environment around the projector, etc., the automatic

adjustment may not work correctly. In such a case, please

choose DISABLE to disable the automatic adjustment, and make

adjustment manually.

GHOST *

Adjust the settings using the ▲/▼ buttons to eliminate ghosting.

* CP-WX5505/CP-WX5500/CP-X5555/CP-X5550 only
(continued on next page)

Summary of Contents for CP-WU5500





























































































































Search results

Summary of Contents for CP-WU5500

Reviews:

Hitachi CP-WU5500, User Manual, Page: 88 / 124

Search results

Summary of Contents for CP-WU5500

Reviews: