Hitachi CP-WU5500 User Manual Download Page 41

Page: 41 / 124

Operating

Using the EDGE BLENDING features

1. MODE (MANUAL)

OFF: Disables the Blending function.

MANUAL: Allows you to adjust Blending Region or Blending Level by using menu.

• IMAGE OPTIMIZER is not selectable when Blending is set to other than OFF.

• ECO MODE is not selectable when Blending is set to other than OFF.

2. BLENDING LEVEL

Select BLENDING LEVEL with ▲/▼ buttons.

25] can be selected with ◄/► buttons.

Adjust the brightness of Blending Region according to the settings.

3. BLENDING REGION

3.1 Specifying Blending Region

Select one of the four sides with ▲/▼/◄/► buttons and press

ENTER

button. Blending Region can be specifi ed for left and right sides with ◄/►

buttons and for top and bottom sides with ▲/▼ buttons.

Specify Blending Region for each projector.

Adjust them referring to the guide displayed during the adjustment of Blending

Region.

* The minimum value of Blending Region is 200 dots.

(continued on next page)

Guide line

Blend Region

Left Image

Right Image

Summary of Contents for CP-WU5500





























































































































Search results

Summary of Contents for CP-WU5500

Reviews:

Hitachi CP-WU5500, User Manual, Page: 41 / 124

Search results

Summary of Contents for CP-WU5500

Reviews: