manualshive.com logo in svg

Hitachi CP-WU5500, User Manual, Page: 101 / 124

Share
Download
Hitachi CP-WU5500 User Manual Download Page 101

101

SECURITY menu

Item

Description

MY TEXT 

DISPLAY

(1)  Use the ▲/▼ buttons on the SECURITY menu to 

select the MY TEXT DISPLAY and press the ► or 

ENTER

 button to display the MY TEXT DISPLAY 

on/off menu.

(2)  Use the ▲/▼ buttons on the MY TEXT DISPLAY 

on/off menu to select on or off.

ON 

ó

 OFF

When it is set ON, the MY TEXT will be displayed 

on the START UP screen and the INPUT_

INFORMATION when the INFORMATION on the 

SERVICE menu is chosen.
• This function is available only when the MY TEXT 

PASSWORD function is set to the OFF.

MY TEXT 

WRITING

(1)  Use the ▲/▼ buttons on the 

SECURITY menu to select the MY 

TEXT WRITING and press the ► 

button. The MY TEXT WRITING dialog 

will be displayed.

(2)  The current MY TEXT will be displayed 

on the first 3 lines. If not yet written, the 

lines will be blank.  

Use the ▲/▼/◄/► buttons and the 

ENTER

 or 

 button to select and enter 

characters. To erase 1 character at one 

time, press the 

RESET

 button or press 

the ◄ and 

 button at the same time. 

Also if you move the cursor to DELETE 

or CLEAR ALL on screen and press the 

ENTER

 or 

 button, 1 character or 

all characters will be erased. The MY 

TEXT can be input up to 24 characters 

on each line.

(3)  To change an already inserted 

character, press the ▲/▼ button to 

move the cursor to one of the first 3 

lines, and use the ◄/► buttons to 

move the cursor on the character to be 

changed.

After pressing the 

ENTER

 or 

 button, the character is selected. Then, 

follow the same procedure as described at the item (2) above.

(4)  To finish entering text, move the cursor to the OK on screen and press 

the ►, 

ENTER

 or 

 button. To revert to the previous MY TEXT without 

saving changes, move the cursor to the CANCEL on screen and press 

the ◄, 

ENTER

 or 

 button.

• 

The MY TEXT WRITING function is available only when the MY TEXT 

PASSWORD function is set to OFF.

(continued on next page)

Summary of Contents for CP-WU5500





























































































































Reviews:

No comments