background image

1

.

Start a new web browser from the system console.

2

.

Enter the URL of management module web console (enter "https://

192.168.0.1/" when factory default setting) into the address field box of

the browser.

Table 1-2 Factory default account settings for the system

administrator

Item

Factory default

IP address of management module

192.168.0.1

URL of Web console

https://192.168.0.1

Tip:

The above URL indicates the default IP address of management

module, and port number is not entered since using default number.

If you changed the IP address of management module, and the port

number of web console, enter the corresponding URL for your

environment.

The URL is configured in the following form:
http://< IP address>:< port number> or
https://< IP address>:< port number>

The default port number:

¢

http: 80

¢

https: 443

3

.

Log in the Web console of the management module.

4

.

The following table describes the factory default account settings for the

system administrator.

Table 1-3 Factory default account settings for the system

administrator

Item

Factory default

User ID

administrator

Password

password

5

.

Click Resources tab on the menu screen; then, click a server blade, on

which to install the OS.

6

.

Click the Condition tab; then, click Server Blade Action then, click

Start remote console. This opens the Logon screen.

1-4

Installation Overview

Hitachi Compute Blade Series OS Installation Guide for Red Hat Enterprise Linux

Summary of Contents for Compute Blade 2000





















































Reviews: