background image

Usage cautions to ensure correct usage

The following symbols are used to ensure safe usage of the product, to prevent danger to yourself and other

parties and to prevent damage to property.

Symbols

This symbol indicates that incorrect handling due to ignoring this symbol

can result in the possibility of personal injury or even death.

This symbol indicates additional

cautions (including warnings).

WARNING

Caution

(general)

This symbol indicates forbidden

actions.

This symbol indicates required actions.

Safety Cautions

Contact your
local dealer.

Disconnect the
power plug from
the power outlet.

When a malfunction occurs, disconnect the power
plug from the power outlet and take measures to
prevent other people coming near the plasma
display.

In the cases such as

The plasma display is loose and vibrates to an extreme degree,

Mounting screws or parts are loose or missing,

failure to take appropriate actions can result in injury.
Perform the following actions immediately whenever a
malfunction occurs.

Turn off the plasma display power switch.

Disconnect the power plug from the power outlet.

Surround the area with rope, etc., to prevent other people
coming near.

Contact your local dealer.

Ask your dealer to install, move or adjust the wall-
mount unit.

Incorrect installation or adjustment can cause the plasma display
to fall.

Handling by other than
professional contractors
is prohibited.

This symbol indicates that incorrect handling due to ignoring this symbol

can result in the possibility of personal injury and physical damage.

CAUTION

Forbidden

(general)

Required

(general)

Disassembly

prohibited

Indicates that the power plug is to be
disconnected from the power outlet.

WARNING

40

En

Summary of Contents for CMP5000WXJ


























































Reviews: