4
WARNINGS
Fire or electric shock may cause death or serious injury unless you follow the instruction below.
n
The enclosed power cord must be used !
Failure to do so may cause electric shock hazard or fire hazard.
In USA/Canada
, use a UL LISTED/CSA LABELLED or CERTIFIED power cord set meeting the following specifications :
Rating: min. 125V, 7A , Length: max. 3.0m , Type: SVT or SJT
Plug type: NEMA 5-15P figure, Parallel blade, Grounding type
In Europe
, a proper European standard approved power cord is to be used with this monitor.
For a rated current up to 6 A, a type not lighter than H05VV-F 3G 0.75 mm
2
or H05VVH2-F 3G 0.75 mm
2
must be used
UK customers please follow the instructions on the following page.
n
n
Use only the correct voltage power outlet with earth connection !
100 - 120 V for USA, Canada, etc.
200 - 240 V for Europe, etc.
(This monitor will automatically adjust to the input voltage 100 - 120 / 200 - 240V.)
n
n
Be careful of power cord connection !
Before inserting the plug of the power cord into a power point of the correct voltage, check that the connection portion of the
power cord is clean.
Insert the plug of power cord to a power point firmly, otherwise it may cause electric shock or fire hazard.
n
n
Do not touch the power plug when during thunderstorms
Death or injury may occur
n
n
Do not touch the power plug with wet hands.
Death or injury may occur
n
n
Do not block ventilation holes.
Blocking the ventilation holes while using of the monitor or just after switching off the power, may cause a fire or electric
shock due to heating up the monitor.
: Only use the monitor with the display in an upright position
: Do not enclose the monitor in a cabinet without adequate ventilation.
: Do not use the monitor on a carpet or mattress.
: Do not cover the monitor during operation.
!
