background image

 

 

2

handling, operation, installation, service and maintenance of the monitor. This warranty is 
for the benefit of the original owner only in accordance with all terms stated in this 
warranty. Warranty is not transferable. 
To obtain warranty service, call 1-800-562-2552 to obtain a return authori

s

ation number 

and the location of your Hitachi service cent

re

. If a problem occurs within the first 30 days 

after purchase AND IF CONSISTENT WITH YOUR DEALER’S RETURN POLICY, you 
can return the monitor to the dealer from whom you bought it. Returns through dealer are 
subject to all dealer return policies and possible charges. Not all dealers accept returns. 
For warranty service, if you choose to ship the monitor rather than delivering it in person, 
you must assume the risk of damage or loss in transit. You must also use the original 
shipping container (or equivalent packaging), pay shipping charges and insurance, and 
enclose a copy of the proof of purchase date with the monitor. DO NOT return your 
monitor without a return authori

s

ation number or the shipment will be refused and returned 

to you at your expense. 
NEVER open the monitor cabinet. If the monitor is not operating properly, contact Hitachi 
America Ltd. service cent

re

 (Call 1-800-562-2552). DO NOT OPEN THE MONITOR 

HOUSING UNDER ANY CIRCUMSTANCES. BY OPENING THE MONITOR HOUSING 
YOU WILL EXPOSE YOURSELF TO HIGH VOLTAGE AND POSSIBLE SEVERE 
ELECTRICAL SHOCKS AND VOID ALL WARRANTIES. 
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE ON THIS MONITOR IS LIMITED TO THE 12, 36 or 60 MONTH DURATION 
OF THIS WRITTEN WARRANTY, AS APPLICABLE. ALL WARRANTIES SET FORTH IN 
THIS WARRANTY ARE LIMITED TO 12, 36 OR 60 MONTHS FROM THE DATE OF 
PURCHASE AS INDICATED IN THIS WARRANTY. NO WARRANTIES WHATSOEVER 
WILL COVER THIS MONITOR BEYOND THE     STATED 12, 36 OR 60 MONTHS. 
HOWEVER, SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN 
IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO 
YOU.  
IF THIS MONITOR IS DEFECTIVE, YOUR ONLY REMEDY IS REPAIR OR 
REPLACEMENT, AS DESCRIBED ABOVE. UNDER NO CIRCUMSTANCES WILL 
HITACHI AMERICA, LTD. BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES, INCLUDING ANY LOST SAVINGS, LOST PROFITS, OR ANY OTHER 
DAMAGES CAUSED BY THE USE OF THIS MONITOR OR INABILITY TO USE IT, 
EVEN IF THE DEALER OR HITACHI AMERICA, LTD. HAS BEEN ADVISED OF SUCH     
LIABILITY OR OTHER CLAIMS.   
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL 
OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION OR EXCLUSION MAY 
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND 
YOU MAY HAVE OTHER RIGHTS WHICH VARY STATE TO STATE.   
THIS WARRANTY APPLIES TO NEW, CURRENT, PRODUCTS SOLD THROUGH 
AUTHORI

S

ED HITACHI RESELLERS ONLY AND DOES NOT APPLY TO PRODUCTS 

SOLD AFTER THEY ARE DISCONTINUED OR REFURBISHED OR BOUGHT FROM 
ANYONE OTHER THAN AN AUTHORI

S

ED HITACHI RESELLER. 

Summary of Contents for CML158XW

























Reviews: