POWER SAVING SYSTEM
.
T h i s m o n i t o r c o m p l i e s w i t h V E S A a n d
E
N E R G Y
S
TAR
*
p o w e r s a v i n g r e q u i r e m e n t s .
T h e
power saving system works only when used with VESA DPMS compliant PC’s
graphic controllers,
,
Table 1-2.
Power
Saving System
VESA DPMS
Power Saving States
Power Saving
Video
H. Sync. V. Sync.
Power
Power Indicator
Mode
O N
Active
Yes
Yes
98 W (typical)
Lighting Green
Stand-by
B l a n k e d N o
Yes
Less than
W
Suspend
Blanked
Yes
N o
Lighting Orange
Active OFF
B l a n k e d N o
N o
Less than 3 W
NOTE:
When to switch the power Off during the monitor is in Active OFF mode, sometimes
the power indicator lighting continues a few seconds.
It is not failure.
& PLAY
This monitor complies with VESA
specifications. Plug
Play is a system, by
which computer, peripherals (including monitors), and operating system manufacturers
comply with for this user-friendly function.
It works when the monitor is connected to
DDC ready computer that is running an operating system software that incorporates
Plug
Play functionality.
SIGNAL CHECK
Your monitor is equipped with an automatic Signal Verification System.
The Table l-3
below outlines the operation of this system.
Table 1-3.
Signal Check
Signal Condition
Indication of OSD
Power Indicator State
Proper signal is detected The OSD indicates the horizontal The power indicator lights
by the monitor.
frequency and vertical frequency green.
on the adjustment menu.
No Sync. Signal is detected The OSD indicates the message After 10 seconds, the
by the monitor.
“POWER SAVE” for 5 seconds colour of the power
after which time the unit will turn indicator will turn to
into Power Saving Mode.
orange.
A video signal is applied The OSD indicates the message The power indicator will
to the monitor that is “INVALID SCAN FREQ.“.
be illuminated as a solid
b e y o n d t h e m o n i t o r s c a n
green colour.
range.
- 1 5
