OPERATION
Power ON/OFF
Press the power switch, to switch the power ON or OFF. When power is ON, the
.
power indicator lights.
NOTE:
* Turn on the monitor first, then the computer.
* After turning OFF the power switch, wait at least 5 seconds before restarting the monitor.
If this 5 second delay is not observed, the monitor may operate incorrectly.
Brightness/Contrast Adjustment
(1) Press one of the adjustment buttons when the OSD
(On Screen Display) is not shown. The OSD
function
then shows the condition of
brightness and contrast.
(2) To adjust, use the adjustment buttons
for
brightness, and
for contrast.
Other Functions
Brightness/C
(1) Press the menu button when the OSD is not shown.
The OSD function
then shows the main
menu.
has 4 sub menus (Screen Menu,
Recall Menu, OSD Menu and Color Menu). You
can call them by the functions of the main menu.
(2) To select the function of the menu, use the
Main Menu
a d j u s t m e n t b u t t o n s
(3) To execute the selected function, use the adjustment
buttons
in the Table l-l overleaf.
NOTE:
You can select the OSD language.
Use the function “LANGUAGE SELECT” of the
“ O S D M E N U ” .
* To return to the main menu from any sub menu, press the menu button.
* To’clear the OSD, press the menu button at the main menu, use the function “OSD
EXIT”, or wait for a definite period.
* The adjusted condition will be stored automatically at clearing the OSD.
* The OSD might be turned on and off continuously in a short period when the OSD is
displayed in a certain
position
of the screen.
This phenomenon is not a failure.
Simply
change the OSD position a little up or down, so that the OSD will be stable.
l
-
9
