[ R E A R
R.G.B. SIGNAL INPUT
FUSE
SYNC SIGNAL INPUT
(Some displays
are not equipped
with this sync.
input and 75 OHM
terminator.)
AC CORD INLET
OHM TERMINATORS
Fig. 2
FUSE
Please always use
IEC type fuse, (contact service personnel).
SIGNAL CABLE CONNECTION
Connect R.G.B. signal BNC connectors to the signal input. When one
display is used, the 75 OHM terminator must be connected to
BNC
connector (see Fig.4 When two more displays are used at the same
time (loop through state) see Fig.6 for connecting cables.
7
