I N S T A L L A T I O N I N S T R U C T I O N S
F O R D E A L E R S
ADJUSTMENTS FOR THE
ON INSTALLATION
.
This document lists the
of
available to
the dealer. Other
exist
not readily accessible
and should not be attempted by untrained personnel.
The
comes in various configurations including displays for
line rates of nominal
and
operations, line synchronisation
on the green video
separate line synchronisation, with or
without D.D.C.
Dynamic Convergence) and models with internal
timing to preferred video driving boards.
Before any of the adjustments below are attempted, please ensure that
the model has been chosen appropriately from the options listed on
page 16 of the operating guide.
The adjustments listed in this note permit some deviations from this
table, but it is important that the most appropriate model be chosen.
ADJUSTMENTS
Before attempting any of the following adjustments, the display should
be powered up for a period of 15 minutes prior to the
1. Switch on the
noting that. the green power indicator adjacent
to the power switch comes on, If it does not;
Check power source and connections
Check fuse
Call a service engineer
10
