-16-
Reassembly can be accomplished by following the disassembly procedures in reverse. However, special
attention should be given to the following items.
1. Mounting the change knob
Mount Spring (C)
[46]
and the Steel Ball D3.97
[47]
into the Change Knob
[45]
as shown in the figure
below.
2. Mounting the gear holder
Before mounting the Roller Holder
[41]
, be sure to insert the Needle Roller
[40]
into the designated position
of the Gear Holder
[35]
because the Needle Roller
[40]
cannot be inserted after mounting the Roller Holder
[41]
.
Reassembly
• Mounting the change knob
Spring (C)
[46]
Change Knob
[45]
Steel Ball D3.97
[47]
Retaining Ring (E-Type)
for D5 Shaft
[36]
• Mounting the gear holder
Needle Roller
[40]
Roller Holder
[41]
Gear Holder
[35]
