background image

8

REGARDING LITHIUM-ION BATTERY 

TRANSPORTATION

When transporting a lithium-ion battery, please observe the 

following precautions.

WARNING

Notify the transporting company that a package contains a 

lithium-ion battery, inform the company of its power output 

and follow the instructions of the transportation company 

when arranging transport.

  Lithium-ion batteries that exceed a power output of 

100Wh are considered to be in the freight classi

fi

 cation 

of Dangerous Goods and will require special application 

procedures.

 For transportation abroad, you must comply with 

international law and the rules and regulations of the 

destination country.

Wh

Power Output

2 to 3 digit number

USB DEVICE CONNECTION 

PRECAUTIONS (UC18YSL3)

When an unexpected problem occurs, the data in a USB 

device connected to this product may be corrupted or lost. 

Always make sure to back up any data contained in the USB 

device prior to use with this product.

Please be aware that our company accepts absolutely no 

responsibility for any data stored in a USB device that is 

corrupted or lost, nor for any damage that may occur to a 

connected device.

WARNING

  Prior to use, check the connecting USB cable for any 

defect or damage.

  Using a defective or damaged USB cable can cause 

smoke emission or ignition.

  When the product is not being used, cover the USB port 

with the rubber cover.

  Buildup of dust etc. in the USB port can cause smoke 

emission or ignition.

NOTE

 There may be an occasional pause during USB 

recharging.

  When a USB device is not being charged, remove the 

USB device from the charger.

  Failure to do so may not only reduce the battery life 

of a USB device, but may also result in unexpected 

accidents. 

  It may not be possible to charge some USB devices, 

depending on the type of device.

DESCRIPTION OF NUMBERED ITEMS 

(Fig. 1 – Fig. 9)

1

Sub Switch

2

Sub Handle

3

Protector

4

Blade

5

Trigger

6

Main Handle

7

Battery

8

Selector switch

9

Stroke speed indicator lamp

0

Ventilation holes

!

Terminals

@

Battery cover

#

Blade case

$

Battery level indicator switch

%

Battery level indicator lamp

SYMBOLS

WARNING

 

The following show symbols used for the machine. 

Be sure that you understand their meaning before 

use.

CH3656DA: Cordless Hedge Trimmer

To reduce the risk of injury, user must read 

instruction manual.

Do not use a power tool in the rain and moisture 

or leave it outdoors when it is raining.

Switching ON

Switching OFF

Removing the battery

Selector button 

1 LED illuminated: 1000 /min 

2 LEDs illuminated: 1170 /min  

3 LEDs illuminated: 1330 /min  

4 LEDs illuminated: 1500 /min  

0000Book̲CH3656DA.indb   8

0000Book̲CH3656DA.indb   8

2017/11/14   15:24:10

2017/11/14   15:24:10

Summary of Contents for CH 3656DA

















Reviews: