– 18 –
English
MAINTAINING YOUR TABLE SAW
MAINTENANCE
EC-Declaration of Conformity
WARNING
To avoid injury from accidental starting, always turn the switch off (“0”) and remove the power plug from the
power source before changing the blades.
GENERAL MAINTENANCE
Occasionally use a cloth to wipe off chips and dust from the machine. And oil the rotary parts once a month to extend
the tool life. Do not oil the motor.
BRUSH INSPECTION
Check the motor brushes after the first 50 hours of use for a new machine or after a new set of brushes have been
installed. After the first check, examine them every 10 hours of use.
When the carbon is worn to 6 mm in length or if the spring or shunt wire is burned or damaged, replace both brushes. If
the brushes are found serviceable after removing, reinstall them.
Rexon Industrial Corp., Ltd. declares this Table Saw,
Model C10RD, is in conformity with the Low Voltage
Directive 73/23/EEC and the Amendment Directive
93/68/EEC and the Machinery Directive Annex 1
of 98/37/EC and EMC Directive 89/336/EEC. The
conformity is certified by TÜV Rheinland Product Safety
GmbH, Am Grauen Stein, D-51105 Köln, Germany.
George Ku, Marketing manager
Date: 24, August, 2006
Rexon Industrial Corp., Ltd.,
261 Jen Hwa Road,
Tali, Taichung 412
Taiwan, R.O.C.
