35
English
(3) Setting to cut crown moldings at positions
1
and
4
in Fig. 32 (see Fig. 37; tilt the head to
the right):
1
Turn the turntable to the right and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3°
* For 38° type crown moldings:
31.6°
2
Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings:
30°
* For 38° type crown moldings:
33.9°
3
Position the crown molding so that the upper surface (
Ⓑ
in Fig. 31) contacts the fence
as indicated Fig. 39.
(4) Setting to cut crown moldings at positions
2
and
3
in Fig. 32 (see Fig. 38; tilt the head to
the right):
1
Turn the turntable to the left and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3°
* For 38° type crown moldings:
31.6°
2
Tilt the head to the right and set the Bevel Angle as follows:
* For 45° type crown moldings:
30°
* For 38° type crown moldings:
33.9°
3
Position the crown molding so that the lower surface (
Ⓐ
in Fig. 31) contacts the fence
as in Fig. 40.
Fig. 37
Fence (A)
Base
Miter angle scale
Turntable
Bevel angle scale
Head
4
1
Turntable
Fig. 38
Head
Bevel angle scale
3
Miter angle scale
Base
Fence (B)
2
Fig. 40
Fence
Ⓐ
Ⓑ
Table on base
Fig. 39
Fence
Ⓐ
Ⓑ
Table on base
WARNING:
Always
fi
rmly clamp or vise to secure the crown molding to the
fence; otherwise the crown molding might be thrust from the
table and cause bodily harm.
000Book̲C10FSHC̲NA.indb 35
000Book̲C10FSHC̲NA.indb 35
2017/06/20 18:36:58
2017/06/20 18:36:58
