34
English
(1) Setting to cut crown moldings at positions
1
and
4
in Fig. 32 (see Fig. 33; tilt the motor
head to the left):
1
Turn the turntable to the right and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3°
* For 38° type crown moldings:
31.6°
2
Tilt the motor head to the left and set the Bevel Angle as follows:
* For 45° type crown moldings:
30°
* For 38° type crown moldings:
33.9°
3
Position the crown molding so that the upper surface (
Ⓐ
in Fig. 31) contacts the fence
as indicated in Fig. 35.
(2) Setting to cut crown moldings at positions
2
and
3
in Fig. 32 (see Fig. 34; tilt the head to
the left):
1
Turn the turntable to the left and set the Miter Angle as follows:
* For 45° type crown moldings:
35.3°
* For 38° type crown moldings:
31.6°
2
Tilt the head to the left and set the Bevel Angle as follows:
* For 45° type crown moldings:
30°
* For 38° type crown moldings:
33.9°
3
Position the crown molding so that the lower surface (
Ⓑ
in Fig. 31) contacts the fence
as in Fig. 36.
Fig. 33
Bevel angle scale
Turntable
Fence (A)
Miter angle
scale
Head
Base
4
1
Turntable
Bevel angle scale
Base
Miter angle scale
Fence (B)
Fig. 34
2
3
Head
Fig. 35
Fig. 36
Fence
Ⓑ
Fence
Ⓐ
Ⓑ
Ⓐ
Table on base
Table on base
000Book̲C10FSHC̲NA.indb 34
000Book̲C10FSHC̲NA.indb 34
2017/06/20 18:36:56
2017/06/20 18:36:56