UK-8
2. To activate full scan, press the STOP/MENU/MONO/ST. button on the unit (or remote control) once to enter
into the “Setup menu”, then select the SELECT/REPEAT mode for selection, when the display shows “Full
scan”, press the SELECT/REPEAT button on the unit (or remote control) to confirm, the display will show
“Scanning …” and a slower progressing slide bar.(F9)
3. All the stations that have been found will be stored automatically, to explore the stations that have been
found, first press the SELECT/REPEAT button on the unit (or remote control) once, then select the SELECT
/REPEAT mode for selection, when you find a station that you would like to listen to, press the SELECT
/REPEAT button on the unit (or remote control).
DAB manual tune
1. To select manual tune, press the STOP/MENU/MONO/ST. Button on the unit (or remote control) to enter into
the “Setup menu”, when the display shows “Manual tune”, press the SELECT/REPEAT button on the unit
(or remote control) once to confirm.(F10)
2. Select the SELECT/REPEAT mode to scroll through the DAB channels, the display will show “5A to 13F”
and their associated frequencies.
3. W
hen your desired frequency appears in the display, select the SELECT/REPEAT mode to confirm. The
name of the station group (ensemble/multiplex) will be displayed.
4. To see what stations are present on the found ensemble/multiplex, first press the SELECT/REPEAT button
on the unit (or remote control) once, and then select the SELECT/REPEAT mode, when your desired station
appears in the display, press the SELECT/REPEAT button on the unit (or remote control) again to select.
Secondary Services
On some occasions you will see a “>” symbol appeared after the name of the station, this indicates that there
are secondary services available to that station. These secondary services contain extra services that relate to
the primary station. E.g. a sports station may want to add extra commentaries. The secondary services are
inserted directly after the primary station. To select the secondary station, press the SELECT/REPEAT button
on the unit (or remote control) when the “>” appears in the display.
FM mode
1. To select FM, press the DAB/FM button on the unit (or remote control), the display will show FM and the
frequency.
2. To activate frequency auto search, press and hold the SKIP/TUNE SEARCH (UP or DOWN) button on the
unit (or remote control) until it starts to scan down or up the frequency band; it will stop automatically once a
station has been found.
3. You can also press the SKIP/TUNE SEARCH(UP or DOWN) button on the unit (or remote control) to select
your desired frequency.
4. Press the STOP/MENU/MONO/ST. button on the unit (or remote control) to toggle select between the FM
“STEREO” and “MONO” reception.
STORING AND RECALLING STORED PRESET STATIONS
In either DAB or FM mode, you can store up to 20 stations to the favourite presets; this will enable you to get
direct access to your favourite stations.
1. To store a preset, first tune to your desired station, then press the MEMORY button on the remote control
once, the display will show “PRESET#” and flash.(F11)
2. Press the PRESET/FOLDER (UP or DOWN) button on the remote control to select your desired
station preset number, then press the MEMORY button on the remote control to confirm your selection; the
display will show “Preset # saved” in DAB mode.(F12)
3. To recall a preset station, press the PRESET/FOLDER (UP or DOWN) button on the remote control to select
the stations that you have stored; the display will show “Preset # loaded” in DAB mode.
4. If you press a preset that hasn’t been allocated a station; In DAB mode, the display will show “Preset # free”.
Note: The stored stations will be saved into its memory and power off will not erase it. Storing a new
station into a preset location will erase the previously stored station in that location.
DAB RESET
When you move the radio to another part of the country, your pre-tuned and stored DAB stations may no longer
be available.If this is the case then you will need to reset your radio back to its original factory settings; to
perform a DAB reset, please do the following:
1. Press the DAB/FM button on the unit (or remote control) to select DAB mode.
2. press the STOP/MENU/FM MO./ST. button on the unit (or remote control) once to enter into the “Setup
menu”, then select the SELECT/REPEAT mode for selection.
3. When the display shows the “DAB Reset”, press the SELECT/REPEAT button on the unit (or remote
control) once, the display will show “Press SELECT/REPEAT to confirm reset …”.(F13)(F14)
F9
F10
F11
F12
F13
F14
