SLEEP FUNCTION
SLEEP FUNCTION
You can program the system to switch itself off after a set period of time.
1. Press the SLEEP button on the remote control. “Sleep 90 min” will appear in the display.
2. Press the SLEEP button to cycle through the sleep time options:
3. When your desired sleep time appears in the display, release the button and the sleep timer is activated.
The “second” digits of the clock will change to display “S#” where “S1” represents “10 minutes”and so
on.
4. When the sleep time arrives, the unit will switch off. To turn the sleep function off, press the SLEEP button
again. The display will show “Sleep OFF” and the “S#” will revert back to show the “second”.
5. The sleep timer status can be checked by using the DISPLAY/INFO button.
PRESET EQ
PRESET EQ
Press the EQ button to cycle through the
different preset EQ options:
The EQ status can be checked by using the DISPLAY/INFO button.
UK-13
90 6 0 3 0 10
FLAT
JAZZ
ROCK
CLASSIC
POP
Recording from radio or CD
1. Open the cassette button door and press the button to open the cassette compartment.
2. Insert the cassette tape into the compartment with the full reel on the left hand side and the open end
facing downwards, push the cassette well down and then close the door.
3. To record a DAB or FM broadcast, press the TUNER button and select your desired station, then press
the
●
button to start recording.
4. To record CD tracks, press the CD button, select and play your desired CD track, then press the
●
button
to start the recording.
5. To stop recording, press the button.
Auto stop
During play or record, when the tape reaches its end, the built-in auto stop mechanism will stop the cassette
automatically. When recording from CD or tuner, the unit will stop recording but will remain in CD or tuner
mode.
TIMER FUNCTION
TIMER FUNCTION
You can set the timer to switch on the system at your desired time and listening mode.
1. Press the TIMER button to toggle the timer function between “ON” and “OFF”, the display will show the
timer clock together with “T-ON” or “T-OFF”. During standby, the display will show “TIMER” if the timer is
on.
2. To set the time when the unit will switch on, press and hold the TIMER button until “Timer On Set”
appears in the display. The “hour” digits will flash.
3. Press the or buttons to select the desired hour and press the SELECT button to confirm. The
“minute” digits will flash.
4. Press the I
◀ ◀
or
▶ ▶
I buttons to select the desired minute and press the SELECT button to confirm.
5. Press the or buttons to select CD, DAB or FM and press the SELECT button to confirm.
6. The timer status can be checked by using the DISPLAY/INFO button.
