- 20 -
- Press the clock button (
CLOCK
), the built-in clock starts operating and the seconds start
counting from 0.
Note:
* The operating time of every step shouldn’t be longer than 3 seconds or it will return to the
original display.
* If there is a power failure or the power system is turned off, the clock will lose its setting.
To confirm the clock time
When you press the clock button (
CLOCK
), the clock time is displayed. Wait for a few
seconds until the display returns to the original display.
Setting the Daily Timer
z
In standby mode, you can use the daily timer setting to turn the unit on automatically at a
certain time everyday under standby mode. When the setting timer is on, the timer
indictor “ ” will display on the VFD, however the clock must be set correctly for the timer
function to work.
- In standby mode, press the timer button (
SLEEP
) twice, hour indicator will blink.
- Set the hour with the
C
button or
D
button.
- Press the timer button (
SLEEP
), minute indicator will blink.
- Set the minute with the
C
button or
D
button.
- Press the timer button (
SLEEP
), the selected time is set. Then set the daily timer to “ON”
(daily timer set is in effect) or “OFF” (daily timer set is to cancel) by pressing the
C
button or
D
button.
Note:
* You can only set the daily timer only in standby mode.
* The operating time of every step shouldn’t be longer than 3 seconds or it will return to
time display.
* The sound source of the “timer on” mode is the same as the sound source when the unit
was turned off by the standby switch.
To confirm the daily time
Press the timer button (
SLEEP
) in standby mode, the daily time is displayed. Wait for a
second until the display returns to the time display.
To cancel the daily timer setting
In standby mode, repeatedly press the timer button (
SLEEP
) until the “ON” will display on the
VFD, then you can set the daily timer to “OFF” by pressing the
C
button or
D
button (the
daily timer will be cancelled).
Turning off the system also cancels the daily timer.
Setting the Sleep Timer
z
Use the sleep timer to turn the system off after a some time when playing. By setting the
sleep timer, you can fall asleep and know that your system will turn off by itself rather than
playing all night.
- Play a disc or tune in to the desired station.
- If you set the sleep timer first, each time you press the sleep button (
SLEEP
), it changes
the number of minutes shown on the VFD in this sequence:
- -
10
20
...
80
90
00
Summary of Contents for AX-M140
Page 1: ......
