- 14 -
If tuning is successful then the display reverts to the tuned state
If tuning is not successful, then the ‘not available’ message is displayed.
If no preset has previously been stored then the following message is displayed for 3 seconds…
Then reverts to the current station display.
Quick Scan
If the user presses the
Auto Tune
button briefly, then only a (
Quick
) scan of channels 11A – 12D is
undertaken (unless a previous full scan has detected an ensemble outside this range, in which case
a persistent flag has been set and a
Full
scan is undertaken instead.
The above message is displayed on the screen for at least 2 seconds.
Full Scan
If the user holds the
Auto Tune
button down for at least 2 seconds, then a (
Full
) scan of all channels
in Band III is undertaken. The following message is displayed on the screen for at least 2 seconds.
If any ensembles are found during the full scan that lie outside the normal UK Band III range, then a
persistent flag is set to indicate the fact, to ensure that even a short press of the
Auto Tune
button will
initiate a full scan next time.
INFO Button (Unit and Remote)
If the
INFO
button is held down for more than 2 seconds, then this causes the advanced information
display to be shown. When the info button is clicked or held subsequently, then the info display
returns to the start of the cycle.
Pressing INFO once will give you the following option:
Program Type
The bottom line displays the static PTY information centred (in the long name format, max. 16
characters).
Pressing INFO twice will give you the following option:
Auto Tune
Quick Scan
Auto Tune
Full Scan
Planet Rock DAB
Pop Music
Classic DAB
Air on a G String by
Planet Rock DAB
Preset 01 Empty
Planet Rock DAB
Summary of Contents for AX-M140
Page 1: ......
