Hitachi 37LD8700UA, Instructions For Use Manual

Page: 41 / 44

Once the TV has found all your local stations, they are then automatically
assigned a programme number and name, if available from the
broadcast.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
GB
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV
please ensure that they are switched on before automatic tuning begins. In the case of
a VCR, insert a pre-recorded tape and begin playback of your equipment. These
measures ensure that all your external equipment is tuned in during the Auto Setup
procedure.
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored
in the memory and the following message appears on the screen.
1
2
3
5
APS is running...
UK - I 055,25 Mhz
Cancel
After APS is finalized, the programme table will appear on the screen.In the
programme list you will see the programme numbers and names assigned to the
programmes.
Language
UK
PLEASE CHECK ANTENNA CABLE
OK Cancel
AUTO PROGRAM
AUTO. PROGRAMMING SYSTEM
Country
English
4
| }
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes No
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel searching
AUTOMATIC SEARCH
Channels:
12 %
To start installation process, select to cancel select This process
will take about five minutes. To cancel searching, you can press “ ” button at
any time during the process.
“ Yes”, “ No”.
After process is completed, a message asking for analogue
channel search appears on the screen. To continue APS, first select the language
and country by pressing
/ button and then press the RED or “ ” button
Automatic Search
OK
For details on the Program menu please refer to the Installation Menu section of
the instruction book.
GB
500
864
70