Hitachi 37LD8700CA, Instructions For Use Manual

Page: 28 / 48

- 27 -
Press the BLUE button to cancel APS if you
do not want to delete your existing
programme list.
To continue APS, first select the country by
pressing
_
/
`
button and then press the RED
or “ OK ” button.
After APS is finalized, the programme table
will appear on the screen.
Source menu
By pressing _ / ` button, select the sixth icon.
Source menu appears on the screen.
In source menu, highlight a source by press-
ing
a
/
b
button and switch to that mode by
pressing
_
/
`
or “ OK ”button.
PC Mode
Installation
• Power off both Computer and Display before
making any connections.
• Set your PC’s resolution correctly before con-
necting to the TV. See the table on page 36
for supported modes.
• Use a D-SUB cable to connect the TV’s PC
input to the computer’s RGB output terminal.
• Tighten the screws of the Display cable until
the connectors are fastened securely (finger-
tighten only).
Menu System in PC mode
Press the button. The menu will be dis-
played in the middle of the screen.
PC Picture Position Menu
By pressing _ / ` button, select the first icon.
PC Picture Position menu appears on the
screen.
Autoposition
If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
• Select
Autoposition item by using
a
/
b
buttons.
• Press ` or “ OK ” button.
Warning: Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
H (Horizontal) Position
This item shifts the image horizontally to right
hand side or left hand side of the screen.
• Select
H Position item by using
a
/
b
but-
ton.
• Use _ / ` button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards
the top or bottom of the screen.
• Select
V Position item by using
a
/
b
but-
ton.
1-ENG-3730W-HL02126UK-37 INCH-(LG)-PEU_IDTV-NEW SOFT-50090756.p65 21.07.2006, 16:42 27