Timer Features
- 22 -
number when changing channels or pressing RECALL.
1. Press
.
2. Press CURSOR
or
and
or
to highlight the Channel I.D. Icon.
3. Press
to display the Channel I.D. Menu.
4. Press CURSOR
or
, or use the Remote Control Keypad to enter the channel
number you wish to assign a Channel Identifier.
5. Press CURSOR
to highlight ENTER I.D.
6. Press CURSOR
or
to select first character in Channel Identifier. Then press
cursor
to move cursor to the second position and repeat until the complete Channel
Identifier is entered (up to 4 characters).
7. Press CURSOR
or
to highlight ENTER CHANNEL NUMBER. Then repeat steps 4
through 6 to continue adding Channel Identifier(s).
8. Press
twice to exit menus.
NOTE: To delete a Channel I.D. (Station Identifier) from memory all four characters
positions in the "ENTER I.D." area must display a dash mark (-).
NOTE:
When the Maximum amount of channel identifiers are entered, "FULL" will be display in
the caption position.
Timer Features
Sleep Timer
This feature is used for automatic turn off in 30, 60, 90 minutes. Display will flash 3, 2, and 1 to
indicate the last three remaining minutes prior to turn off. The recall display will also appear.
