Power Management Utility
The power management utility diskette contains the files OFFH.COM and
OFFH.SCR which allows the user to set the idle time required before the
monitor goes into the power saving mode. It allows two levels of power
saving defined as follows:
Power Saving
Mode of Operation
Power Consumption
Normal
This is the default mode when the
monitor is first powered on or in use.
Level 1
Standby
f
suspend
less than 15 Watts
Level 2
Off
less than 8 Watts
8.1. Using Power Management under DOS
The interval required to enter Level 1 and Level 2 of power saving may be
set in either of two ways:
l
through the Power Management Utility menu
l
directly through the DOS command prompt
To use the Power Management Utility menu, type OFFH at the DOS
command prompt. The following menu appears:
Power Management Utility
Hitachi
Please enter the time interval required to enter
level 1 and level 2 of power saving. Time interval
for level 2 should be longer than level
Level 1 : 2 min
Level 2 : 4 min
Left, Right
: to Set time intervals
Up, Down : to Move between levels
Enter
: to Exit
Esc
: to Abort
18
