- 51 -
,QVWDOO
3&&%*
Selecting Band
Band, can be chosen either,
C or S by or button.
Selecting Channel
Channel
can be changed by or but-
ton, by Digit Buttons or by the Double Digit
button with digit buttons.
For band C,
01 - 83, WEST EUROPE.
01 - 76, FRANCE.
For band S,
01 - 41 .
Selecting Standard
Using or button on
Standard
, you
can change the standard to
B/G, L
/
L'
.
Selecting Search
To start the search process, press but-
ton for forward search or button for back-
ward search. If a signal is found or reaches
to end of the band after searching, press
or buttons to continue search pro-
cess. To stop the search process when you
want, press or buttons again.
Selecting Fine Tuning
You can use the Fine Tuning process for
fine adjustment (after coarse adjustment), if
you are not happy about the image on the
screen.
Use or button on
Fine Tuning
item,
until getting the best image on the screen.
Normally the Fine Tuning cursor is placed
next to the left side on the slider and this is
indicated with one arrow.
Setting VCR ( Video Cassette Recorder )
Mode
This item can be seen in
TV,
AV-1, AV-2, AV-3,
S-VIDEO modes.
If you want to watch a
VCR
source from one
of these modes, then it will be better to set
VCR
mode on. For this, while the cursor is
on this item press the or buttons to
set it On.
If you want to watch a
DVD
, then you must
set this item off; because
DVD
is not a
source like a
VCR
and to see the
best
pic-
ture, you must set the
VCR
mode Off.
To Store Settings
Press
OK
button on the remote control to
store the settings directly.
or,
Press , or OK button on
Store
op-
tion to store Install menu settings.
Installation menu in AV mode is as
follows.
,QVWDOO
2Q
Programme Menu
To enter Programme menu directly, press
the "
" button in TV mode, or
Press "
M
" button, now you are in main
menu. In the main menu, select
Program.
using or button. Then enter the
Programme menu, press / or
OK
button.
2-ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220.p65
01.12.2004, 14:19
51
