5
i) Support panels or any oversized workpiece to
minimize the risk of wheel pinching and kickback.
Large workpieces tend to sag under their own weight.
Supports must be placed under the workpiece near the
line of cut and near the edge of the workpiece on both
sides of the wheel.
j) Use extra caution when making a “pocket cut” into
existing walls or other blind areas.
The protruding
wheel may cut gas or water pipes, electrical wiring or
objects that can cause kickback.
PRECAUTIONS ON USING CUTTER
1. Do NOT use any cutting tool other than a diamond
wheel.
2. Don’t use it for cutting of metallic materials. Diamond
wheel may be broken or its service life may be
remarkably reduced when it is used for cutting of
metallic materials . Be sure not to use the wheel for
cutting of metals.
3. Be sure to take an earth leakage breaker or isolating
transformer as electric shock-preventive measures.
4. Pour on water while cutting or scribing concrete, tile or
stone.
5. Keep the motor interior free of water.
6. Wear protective glasses to protect your eyes while
cutting.
7. Prior to use, be sure to check the diamond wheel in such
details as crack, broken part, bent part and the like.
Don’t use a diamond wheel if any of the above detect
is found on the wheel. Also con
fi
rm that no abnormality
exists by actual test running.
8. Proceed with cutting operation when full speed has
been reached.
9. Do NOT apply excessive force.
10. When cutting concrete, tile, or stone, the maximum
cutting depth should be held to within 20mm.
11. Never touch diamond wheel while operating.
12. Never lay down the cutter while the diamond wheel is
revolving.
13. Exercise care to position the cutter at a safe, stable spot
when cutting.
14. Take good care of the power tool and keep it clean.
SPECIFICATIONS
Voltage
230 V
Power Input
1300 W
No-Load Speed
13000 /min
Max. cutting depth
34 mm (wheel dia. 110 mm)
31.5 mm (wheel dia. 105 mm)
Diamond wheel
110 mm external dia. × 20 mm internal dia.
Weight (without cord)
2.9 Kg
STANDARD ACCESSORIES
Wrench ...............................................................................2
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1
Diamond Wheel
A Type
B Type
Diameter
(mm)
Hole
(mm)
Thickness
(mm)
Blade
type
A (Dry)
106
20
1.2
B (wet)
110
20
1
2
Water Plug (with machine screw)
3
Rubber Connector
4
Vinyl Hose
3
2
4
Optional accessories are subject to change without notice.
APPLICATIONS
○
Cutting and scribing of concrete.
○
Cutting and scribing various types of stones.
○
Cutting and scribing various types of tiles.
PRIOR TO OPERATION
1.
Con
fi
rming the earth leakage breaker or isolating
transformer
Before using this Cutter, con
fi
rm that an earth leakage
breaker or isolating transformer as electric shock
preventive measures is installed at the power supply to
which the Cutter is connected.
000Book̲CM4ST̲Eng.indb 5
000Book̲CM4ST̲Eng.indb 5
2015/06/10 12:16:11
2015/06/10 12:16:11
