Hisun HS500ATV-2, Maintenance Manual

Page: 86 / 109

86
1
、gear shift mechanism assembly
2
、gear shift mechanism handle
3
、换档机构
plastic screw of gear shift mechanism
4
、dust-proof cover of gear shift mechanism
5
、dust-proof cover thimble of gear
shift mechanism
6
、elocity joint robber sheath of gear shift mechanism
7
、velocity joint of gear shift mechanism
8
、hex nut(anti)M8
9
、
waste oil pipe
thimble of gear shift mechanism
10
、
waste oil pipe
of gear shift mechanism
11
、
waste oil pipe
thimble of gear shift
mechanism
12
、
waste oil pipe
robber plug of gear shift mechanism
13
、hex nut (
upright
)M8
14
、connecting rod of gear shift mechanism
15
、hex nut
(anti)M8
16. gear shift controling 17. cushionφ6 18. hex nut M6×36
4.5.1Inspection and Maintenance of gear shift Mechanism(refer Inspection and Maintenance of gear shift Mechanism(refer Inspection and Maintenance of gear shift Mechanism(refer Inspection and Maintenance of gear shift Mechanism(refer
to the picture of gear shift Mechanism) to the picture of gear shift Mechanism) to the picture of gear shift Mechanism) to the picture of gear shift Mechanism)
1.Check the mobility of gear shift handle. If it is not working
properly, remove the gear shift Mechanism to check if the
fork , ball and spring is stuck.,in which case replace the
defective component and try again.The last way is to turn to
the professional repairman.
2.If there is lack in the gear shift mechanism , adjust the nut
of the fork to correct position and strengthen gear shift
mechanism .
3.Remove the gear shift mechanism and check whether the linking
rod is cracked; If so, it should be changed.
4.Check whether the bouncing spring of gear shift mechanism is
intense enough.
5.Check whether the gear is engaged correctly and whether