Hisun HS500ATV-2, Maintenance Manual

Page: 53 / 109

53
Torque: 32-36N.m
1)Steering drop arm assembly
2)Hexagon open-groove nutM10
3)cotter pin 3.2*32
4)Tension rod
2.Check whether the inner and outter ball pin of the tension
rod is loosen or got stuck. (Figure 4-1-8)
In occasion of above defects, further inspection of the
exact causation must be carried out and replace with new
ball pin components.
Caution: Continuous use of defective ball pin
might cause severe injury or death.
3.check whether the tension rod is bended, cracked or
rusted. In occasion of above problems, please have the
tension rod replaced.
Caution: tension rod should not be repaired by
welding .
4. Check whether the hexagon open-groove nut and cottor pin
are intact. (No crack or flaw is allowed)(Figure 4-1-8).
Those two components are crucial and should be replaced
whenever there is a potential problem.
5.Check whether the supporing bracket is firmly fixed to