Hisun HS500ATV-2, Maintenance Manual

Page: 78 / 109

78
profile depth. Insufficient tyre pressure can result in not
only intensified wearing of the tyre but also instability
during the course of operating the vehicle (such as hard
turning). Excessive tyre pressure can also reduce the friction
force between the tyre and ground, causing spinning or lose of
control. Therefore, please ensure the tyre pressure strictly
complies with figures shown in the chart above.
Before operating the vehicle each time, please check if
profile depth of the tyre is over worn, which might result in
spinning, instability, lose of control and other potential
security risk of the vehicle.
Caution: Should the profile depth falls below 3mm,
please replace the tyre inmediatly.( Figure
4-2-18)
Figure 4-2-18
Figure 4-2-18)
4
.4 Transmission System
4.4.1
Fore Bridge