6-2 Operation
When the driving select lever is in the neutral
or park position, if the indicator light does not
come on, ask an authorized dealer to inspect
the respective electric circuit.
The engine can be started in any gear if the
rear brake lever is applied. However, it is
recommended to shift into neutral or park
before starting the engine.
4. Press the starting button to start the ATV.
CAUTION:
See the
“
Engine break-in
”
section prior to
operating the engine for the first time.
Starting a warm engine
To start a warm engine, refer to the “Starting a
cold engine” section. The throttle should be
opened slightly.
Warming up
To get maximum engine life, always warm up
the engine before starting off.
Never accelerate hard with a cold engine!
To warm up the engine operate the ATV a one
third throttle for approximately 3 km, or let the
engine run for approximately 3 minutes at 2000
rpm.
Drive select lever operation and
reverse driving
CAUTION:
Before shifting, you must stop the ATV and
return the throttle lever to the closed position,
otherwise the transmission may be damaged.
