5-3 Pre Operation Checks
Brake fluid level
Check the brake fluid level. Add fluid if
necessary. (See pages 8-39
—
8-41.)
Recommended brake fluid: DOT 4
Brake fluid leakage
Check to see if any brake fluid is leaking out
of the pipe joints or brake fluid reservoirs.
Apply the brakes firmly for one minute. If the
lever moves slowly inward, there may be a
leak in the brake system. If there is any
leakage, the brake system should be
inspected by a dealer.
Brake operation
Test the brakes at slow speed after starting
out to make sure they are working properly. If
the brakes do not provide proper braking
performance, inspect the brake pads for
wear.(See page 8-38-8-39.)
WARNING
POTENTIAL HAZARD
Riding with improperly operating brakes.
WHAT CAN HAPPEN
You could lose braking ability, which could
lead to an accident.
HOW TO AVOID THE HAZARD
Always check the brakes at the start of every
ride. Do not ride the ATV if you find any
problem with the brakes. If a problem cannot
be corrected by the adjustment procedures
provided in this manual, have a dealer check
for the cause.
