MAINTENANCE AND ADJUSTMENT OF THE UTV
- 91 -
·
crankcase (with sufficient oil to reach the
specified level)
Oil quantity
Periodic oil change
The oil capacity after the engine is
disassembled and reassembled.
2.2L
The oil should be put into the engine for
after all the oil is drawn out
2.0L
8. Install:
·
engine oil filler plug
9. Warm up the engine for a few minutes, then
stop the engine.
10. Check:
·
engine (for engine oil leaks)
·
oil level Refer to “THE ENGINE “ in chapter 4 .
11. Check:
·
engine oil pressure
a. Slightly loosen the oil gallery bolt
.
①
b. Start the engine and keep it idling until engine
oil starts to seep from the oil gallery bolt. If no
engine oil comes out after one minute, turn the
engine off so that it will not seize.
c. Check the engine oil passages, the oil filter
cartridge and the oil pump for damage or
leakage. Refer to “THE ENGINE” in chapter 4.
d. Start the engine after solving the problem(s)
and check the engine oil pressure again.
e. Tighten the oil gallery bolt to specification.
Oil gallery bolt
8Nm (0.8 kg ·m, 5.9 lb ·ft)
12. Install:
·
console
·
driver seat
Refer to “SEATS” in chapter 5.
