Periodic Service
10-4
Spring Preload Setting(Front)
Minimum(soft): 332mm(13.07 in)
Maximum(hard): 442mm(17.40in)
Spring travel setting(Rear)
Minimum(soft): 402mm(15.83in)
Maximum(hard): 502mm(19.76 in)
NOTE:
Always tighten the locknut against the
adjusting nut, and then tighten it to the
specified torque.
Rebound damping force
Turn the rebound damping force adjusting
screw in direction S to increase the rebound
damping force and thereby harden the
damping, and in direction F to decrease the
rebound damping force and thereby soften the
damping.
1. Rebound damping force adjusting screw
Compression damping force
Turn the compression damping force adjusting
screw (use 3.0 Allen wrench) in direction
ⓐ
to
increase the compression damping force and
thereby harden the damping, and in direction
ⓑ
to decrease the compression damping force
and thereby soften the damping.
1.Compression damping force adjusting screw
WARNING
·
Suspension components become hot
during operation. Never touch the
compression damping force adjusting
screw, the rebound damping force
adjusting screw or the oil reservoir with
your bare hand or skin until suspension
components have cooled.
