Hisense LTDN42K390HK3D User Manual Download Page 5

IV

When it is rainy, please pull out the power plug, CATV plug or 

outside antenna plug to avoid any possible damage to the TV 

set. Do not touch the inducting wire of the antenna.

Where the MAINS plug or an appliance coupler is used as the 

disconnect device, the disconnect device shall remain readily 

operable.

If you do not use the product for a long time, please pull out 

the power plug.
If you find abnormal sound or smell, or there is sound but no 

image, please turn off the TV and pull out the plug immediately 

and contact the professional technicians.
Please do not press the power line and signal line with other 

things.
Please do not make the power outlet overloaded, or it will 

result in the danger of fire.
Keep the power line away from high temperature and heating 

things.
There are some changes for the outdoor antenna if it stays 

outside for a long time, which may affect the picture quality of 

the TV, so please check the antenna or replace it regularly.

Do not clean this unit with volatile oils or dilution, which may 

cause cabinet deterioration or damage its coating surface.
If the cabinet becomes dirty, please clean it with a soft cloth 

which has neutral detergent wet with water.
In the case where such substances that are painted with paint 

or organic solvent and grease, etc. on the surface of the TV 

cabinet, the chemical reaction may be occurred in between the 

rubber cushion on the base and such substances hereinbefore, 

which may cause a slight corrosion on the surface of the TV 

cabinet. Therefore, users are recommended to firstly put a 

layer of protective material (such as pressboard or glass sheet, 

etc.) on the TV cabinet and then place the TV set.

Please do not try to decompose any part of the product, which 

may cause damage to the product as well as harm to the 

human. And it will also make you face the product warranty 

failure.
Please do not remove the back cover. The adjust and check 

inside the unit should only be carried out by the professional 

technicians.
Please do not cover or block the heat-radiating holes in order 

not to hamper the unit to give off heat.
Please do not stick the sharp objects, metal, or liquid into or 

use them to touch the signal interface or heat-radiating holes 

in case of short circuit or damage to the product.

Watch TV at a proper distance, and the best distance is 3 

to 4 times the length of the vertical distance of LCD.
Keep the lighting indoors bright enough to read newspaper.
The volume should be properly set in order not to disturb 

your neighbors, esp. when it is during the night.

It is recommended that 2 or more people should load, unload 

and carry the unit; try to avoid any crash when carrying the 

unit, and protect the LCD screen in particular.
If you touch the LCD screen when turning on or off the TV, 

you can feel the slight electric shock, which is the so-called 

electrostatic and does no harm to your health.

√ Even and steady occasions. 
× Places under direct sunshine or close to heating devices. 
× Places with poor ventilation. 
× Places close to furnace or places to which water, oil or smoke 

is easy to enter. 

× Places where ventilating openings are closed. 
× Unsteady places. 
× Places suffering from easy vibration.
× Places of lot of dust or moist places. 
× Places of high temperatures.

LCD display panel is the advanced S&T product, composed of 

several millions of Movie transistors inside. There can be dark 

or bright spots appearing on the panel. Please note that this 

is a normal phenomenon, which does not affect the overall 

performance.

The incorrect maintenance will lead to damage to the LCD screen, 

which will affect the image effect, so you must pay attention to the 

following items:

Don't clean the screen with the organic solvents, such as 

alcohol, gasoline, etc. or chemical reagents ,such as acid, 

alkali, etc.
Do not clean the screen with any kind of detergent.
After the TV is turned off, you, when necessary, can clean the 

screen with a clean and soft cotton cloth to properly safeguard 

it, but repeatedly cleaning with force is prohibited.
Please do not directly touch the screen with your fingers, 

which may damage the screen surface. What's more, the oil 

and fat on the screen is difficult to remove.
Please do not put pressure on the LCD, for the LCD screen is 

delicate and vulnerable. 
The hard object is not allowed to touch the LCD screen, for it 

is easily scratched.

Alerts: Before using the product, please read the following clauses carefully.

Product

Watching TV

Others

Power and signal

Maintenance

LCD display instruction and maintenance

Method of placement

Important Safety Instructions

Summary of Contents for LTDN42K390HK3D
































Reviews: